Cast Steel Trunnion Type Ball Valve（Electric )

Technical Parameters

Valve model: Q947F/H

Diameter specification: DN25～700mm

Structural form: two-stage casting valve body

Body material: cast steel (WCB), stainless steel (304, 316, 316L)

Nominal pressure: PN1.6, 2.5, 4.0, 6.4MPa

Applicable temperature: -40℃~425℃

Application scope: petrochemical, gas equipment, power equipment, environmental protection water treatment

Product Details

Product Design Features

Serial floating ball valves are mainly applied to natural gas,oil products,chemical engineering,metallurgy,city building,environment protection,pharmacy and food industries, among which the anti-sulphur series are used for long delivery pipes of natural gas that contains hydrogen sulphide medium,a lot of impurity and corrosive substances.

The main structure features include:

1.Construction of the shell

The valve bush of the stationary ball valve can be designed to three types:casting construction, forging construction, and full welding construction,according to user's demand or different working condition.And the ball valve of the full welding construction is mainly applied to underground operation.

2.The unique sealed structure of valve seat

Pre-ball sealed structure,post-ball sealed structure or pre-post-ball double sealed structures are available for choosing to different pressure,medium properties,and sealing requirements of the fixed ball valves.

3.Automatic pressure-relieving structure

When an abnormal rising of pressure appear in the hollow cavity,the single sealed-structure takes on the function of automatic pressure relieving,whiie the double-sealed structure can finish the job through a attached pressure-reliving device to the valve body.

4.Emergent repairman for the sealed structure

When leak was caused by damage on the valve seat or valve stick,the sealed grease injected through the grease feeding valve can seal the valve at once.

5.Fire-resistant Structure

According to the operating condition and user's requirement,ball valve can be designed with a fire-resistant structure up to the fire resistant standards of API607,API 6FA and JB/T6899.Once the soft seal ring is burnt out on fire,the structure can avoid serious leaking of the medium and prevent the fire from scaling up.

6.Anti-static Structure

While operating the valve,the friction between the sphere and the base will produce static charges accumulating on the sphere.To avoid static sparkle,the fire-resistant device is designed to derive the accumulated static sparkle,charges from the sphere.

7.Jam and release

When the valve is close,the valve seats will stop the effluence,and the precipitate in the can be released through the releasing device.

8.Locking Device

A locking structure is designed on the full-open and full-close spots of manual ball valves to avoid abnormal open-and-close produced by miss-operation or unpredictable circuit vibration.On production lines of petroleum and chemicals of flammable mediums,and during the course of outdoor piping,the design is especially advantageous and practical.

9.Full Drift Diameter Structure and Retractive Diameter Structure

The two structure series are produced to meet different requirement of users,The passage inside diameter of full diameter ball valves is the same as that of valve pipe,which is convenient for pipe cleaning.The weight of retractive diameter ball valves is relatively lighter,but the fluid resistance is just 1/7 that of stop valves with the same caliber.Therefore,the application prospects of retractive diameter series is much better.

Main External Connection Dimensions(PN1.6MPa)

DN		25	32	40	50	65	80	100	125	150	200	250	300	350	400	450	500	600	700
d1		25	32	40	50	65	80	100	125	150	200	250	300	337	387	438	489	591	686
L		165	180	190	216	241	283	305	356	394	457	533	610	686	762	864	914	1067	1245
H		50	55	80	102	114	127	152	184	219	273	360	395	430	470	550	580	700	800
Electric	H2	-	-	-	-	-	-	-	-	554	600	652	760	770	830	-	940	940	1115
Electric	L1	-	-	-	-	-	-	-	-	235	235	235	259	400	400	-	410	410	410

(PN2.5MPa)

DN		25	32	40	50	65	80	100	125	150	200	250	300	350	400	450	500	600	700
d1		25	32	40	50	65	80	100	125	150	200	250	300	337	387	438	489	591	686
L		165	180	190	216	241	283	305	381	403	502	568	648	762	838	914	991	1143	1346
H		50	55	80	102	114	127	152	184	219	273	360	395	430	470	550	580	700	800
Electric	H2	-	-	-	-	-	-	-	-	235	235	400	400	410	410	-	420	690	690
Electric	L1	-	-	-	-	-	-	-	-	74	350	350	420	420	400	-	400	410	650

(PN4.0MPa)

DN		25	32	40	50	65	80	100	125	150	200	250	300	350	400	450	500	600	700
d1		25	32	40	50	65	80	100	125	150	200	250	300	337	387	438	489	591	686
L		165	180	190	216	241	283	305	381	403	502	568	648	762	838	914	991	1143	1346
H		50	55	80	102	114	127	152	184	219	273	360	395	430	470	550	580	700	800
Electric	H2	-	-	-	-	-	-	-	-	235	235	400	400	410	410	-	420	690	690
Electric	L1	-	-	-	-	-	-	-	-	74	350	350	420	420	400	-	400	410	650

(PN6.4MPa)

DN		50	65	80	100	150	200	250	300	350	400	500	600	700
d1		50	65	80	100	150	200	250	300	337	387	489	591	686
L		292	330	356	406	495	597	673	762	826	902	1054	1232	1397
H		114	124	133	159	250	294	395	445	500	530	660	800	900
Electric	H2	-	-	-	-	554	574	731	771	867	802	979	1085	1148
Electric	L1	-	-	-	-	235	235	400	400	410	410	420	690	690

Related Products

V-ball valve（Electric）

Cast steel electric ball valve

Floating ball valve（Electric ）

V-type shut-off ball valve（Electric …