UFS steam separator

Technical Parameters

Product model: UFS
Nominal diameter: DN20~300mm
Nominal pressure: PN1.6~2.5Mpa
Working pressure: PN1.6~2.5Mpa
Working temperature: 425°C

Product Details

Product overview
The steam separator uses the pattern in the body and the principle of steam and water flow to produce different flow directions, and the medium flow direction is sharply converted to separate the steam from the suspended water droplets contained in the steam, which improves the dryness of the steam (the dryness can reach 98%) and ensures the smooth operation of production.

Product features
1. Improve the dryness of steam and send it to the steam equipment to improve the thermal efficiency of the equipment.
2. Prevent water hammer, and the separated condensate is discharged through the trap below.
3. UFS type steam separator is also suitable for the separation of various gases and liquids.

Material of main parts

Part Name	Material
Valve body, bonnet	cast steel
filter cover	stainless steel

External Connection Dimensions

product model	Nominal diameter(mm)	connection method	use pressure (Mpa)	allowable temperature(℃) TMP	Dimensions（mm）
					L	H1	H2	D
UFS1	50	flange	0.01-2.5	350	270	80	250	25 flange
	65				310	90	275
UFS2	80	flange	0.01-2.5	350	400	107	320	25 flange
	125					108	370
UFS3	150	flange	0.01-2.5	350	450	140	410	50 flange
	200					168	435
UFS4	250	flange	0.01-2.5	350	550	203	517	50 flange
	300				600	230	570
			0.01-4.0		600	257	585
UFS5	350	flange	0.01-2.5	350	700	275	650	flange

Precautions for installation and use
1. Before installation, the pipeline must be purged with pressure gas to remove dirt and sundries.
2. The separator should be installed at the lower position of the steam pipeline. It is recommended to install a stop valve before and after the separator.
3. Installation direction: The arrow on the valve body points to the same direction as the fluid in the pipeline (the arrow on the valve body points to the fluid outlet port).
4. A drain valve should be installed at the lower part of the steam-water separator, and the drain valve should be selected according to the displacement and working conditions.
5. In order to prevent the steam-water separator and the lower steam trap from malfunctioning due to dirt blockage, it is recommended to install a filter in front of the steam trap and clean it regularly to ensure the normal operation of the equipment.

Related Products

Free Float Steam Traps

Bell float steam trap

Flanged Inverted Barrel Steam Trap

Threaded Inverted Bucket Steam Traps